Thermocoax Isopad Heating Products
Showing 1–12 of 20 results
-
Anti-Condensation Heating Tape – ACM (155°C)
Isopod IT-ACM heating tape is specifically designed in conjunction with major motor manufacturers to prevent condensation within rotating electrical equipment, such as electric motors, generators, and even large shipboard alternators. The tapes are particularly useful on motors that operate in damp or wet conditions. They offer a low-cost, easily installed solution which can save the expense of costly rewinds and plant downtime.
The product line covers motor heating tapes for operation on 230 V, 115 V, and 48 V, with lengths from 200 mm up to 1702 mm.
-
Crankcase heating cable CCH (120ºC)
Isopod IT-CCH crankcase heating cables are designed to prevent motor damage and maintain efficiency by minimizing refrigerant gas absorption into the compressor oil. Their self-regulating properties ensure energy-efficient heating, with no requirement for thermostat control and no risk of overheating. Crankcase heating cables are constructed with a high-powered self-regulating core, double insulated, and attached to a flexible nylon-locking strap. It is a non-metallic product that will not suffer from corrosion and is most effective in the prevention of moisture and condensation ingress. The thin narrow profile gives flexibility for the heating cables to be fitted to a wide range of compressor shapes and sizes.
-
Fiber Glass Insulated Heating Tape – ITH (450°C)
Isopod IT-ITH is a factory-terminated heating tape with go-and-return series resistance heating elements. They are suitable for high-temperature applications in indoor locations or areas where there is no risk of moisture ingress.
It is electrically insulated with a silicone varnished glass braid and the heating element is enclosed in a glass woven carrier and terminated with cold tails and an M20 gland.
-
FROSTGUARD (65 TO 85°C)
Isopod FROSTGUARD is a self-regulating cut-to-length heating cable for frost protection cable for pipes and low process temperature applications in non-hazardous areas. The small geometry, yet robust, cable adjusts its power output dependent upon ambient temperature. Therefore more heat is generated automatically when needed and less heat in warmer ambient conditions, saving energy. Frost guard can be supplied as a basic heating cable or braided and overheated for increased mechanical, additional chemical protection, and safety.
-
Glass Silk Heating Cable – G25 (450°C)
Isopod IT-G25 type is a factory-terminated heating tape constructed from resistance foil or wire heating elements.
The elements are stitched into a total of six layers (three per side) of glass tape, which acts as a carrier.
These tapes are suitable for indoor use or areas where there is no risk of moisture ingress.
-
Glass Silk Heating Cord – SP (450°C)
Isopod IS-SP is a pre-terminated, very flexible heating cord consisting of a glass-silk insulated, flexible fabric weave with interior heating conductors. IS-SP-H is a higher temperature variant and SP-V is made with a central core to the spiral heating element.
The temperature depends on the power and application. Please make sure that the heating cord does not exceed the maximum withstand temperature. Owing to its small dimensions, the heating cord is used for heating up and compensating for heat loss on short pipes, glass apparatus, or other structures, mainly for laboratory requirements.
The heating cord is not moisture-protected and must only be used in dry areas.
-
Glass Silk Heating Tape – S20 (450°C)
Isopod IT-S20 is a pre-terminated, flexible heating tape with a copper-tinned outer braiding serving as a protective earth braid. The temperature depends on the power and application.
Please make sure that the heating tape does not exceed the maximum withstand temperature.
This heating tape enables maximum power to be installed even in the case of small surfaces.
The heating tape can be used for temperature modification of pipes and structures in the industrial and laboratory sectors.
-
PTFE Heating Cable – KTeS (260°C)
Isopod IS-KTeS is a pre-terminated PTFE insulated heating cable suitable for use where no excessive mechanical loads are expected and moisture may be present.
This flexible and easily installed cable provides inexpensive and versatile heating. Applications include heat tracing of pipes, small containers, tools, machines, extremely thin and short pipes, and machine parts with limited mounting space.
-
PTFE Heating Cable – TeMS (260°C)
Isopod IT-TeMS is a pre-terminated and flexible heating tape. IT-TeMS 2 is used in applications ranging from simple frost protection to temperature maintenance on short pipework and apparatus as well as for general container heating applications. If more power is required, the use of the TeMS 4 or TeMS 6 heating tapes is recommended. The parallel arrangement of the heating conductors ensures a wide heat transfer surface.
The temperature depends on the power and application. Please make sure that the heating tape does not exceed the maximum withstand temperature.
-
PTFE Insulated Heating Tape – ITW/SS (260°C)
Isopod IT-ITW/SS pre-terminated resistance heating tape is specially designed for application in temperatures up to 200°C. The temperature depends on the power and usage. Please make sure that the heating tape does not exceed the maximum withstand temperature.
These highly flexible tapes can be easily coiled around pipelines and valves, supports, pumps, flanges, filters, gauges, or other devices of irregular shape. The resistance element forms a closed heating circuit with connection joints only at one tape end.
-
PTFE Insulated Heating Tape – ITW/SS-M (110 TO 170°C)
Isopod IT-ITW/SS-M is a factory-terminated heating tape having a go-and-return series-resistance heating element insulated with a PTFE sheath covered with a stainless-steel braid complete with an M20 gland.
-
Quartz Glass Insulated Heating Tape – H (900°C)
Isopod IT-H heating tape is suitable where high power input is needed or where work has to be carried out at high temperatures.
The high-quality quartz glass allows a working element temperature of up to 900°C. This tape should only be used in dry atmospheres with additional electrical protection and always with a temperature regulator.