Shop
Showing 289–300 of 376 results
-
PTFE Insulated Heating Tape – ITW/SS (260°C)
Isopod IT-ITW/SS pre-terminated resistance heating tape is specially designed for application in temperatures up to 200°C. The temperature depends on the power and usage. Please make sure that the heating tape does not exceed the maximum withstand temperature.
These highly flexible tapes can be easily coiled around pipelines and valves, supports, pumps, flanges, filters, gauges, or other devices of irregular shape. The resistance element forms a closed heating circuit with connection joints only at one tape end.
-
PTFE Insulated Heating Tape – ITW/SS-M (110 TO 170°C)
Isopod IT-ITW/SS-M is a factory-terminated heating tape having a go-and-return series-resistance heating element insulated with a PTFE sheath covered with a stainless-steel braid complete with an M20 gland.
-
PTFE Protection Tube
PTFE (poly tetra fluoro ethylene) tube has the best chemical resistance of all known polymers. Its temperature range of -70C to +265C opens up PTFE tubing to many applications most other polymers can’t withstand. are ideally suited for the manufacture of high-temperature seals, insulators, and bearings used in semiconductor, aerospace & chemical processing industries. It has excellent thermal and electrical insulation properties and a low coefficient of friction. PTFE is very dense and cannot be processed by melting. PTFE must be compressed and sintered to form useful shapes.
-
QH – 18 Room Heater
LKR.32,500.00power settings : 2400w
adjustable thermostat
high efficiency , energy saving
cool touch housing
safety tip over switch
with fan
-
Quartz Glass Insulated Heating Tape – H (900°C)
Isopod IT-H heating tape is suitable where high power input is needed or where work has to be carried out at high temperatures.
The high-quality quartz glass allows a working element temperature of up to 900°C. This tape should only be used in dry atmospheres with additional electrical protection and always with a temperature regulator.
-
RACO Heating Cable
The TFE/N/MB flexible heating cable is an ideal design for the economical application in cold room doorframe, defrost-dish, drain-line and etc. Having a diameter of 2.8mmØ (+/- 2mm), It’s can be applied to a small diameter pipeline. With an operating temperature of –40º to +250ºC, it’s ideal for versatile usage. Variable lengths are available, and all lengths are completed with 1000mm factory terminated cold lead.
-
Raychem – CE-T2Red/ETL- Termination
Hot applied low profile End seal kit, for T2 Red heating cables, for hazardous areas, heat-shrink, low profile design for installation under insulation.
-
Raychem – R-TC-NRG Timer Thermostat (Polar White)
Automatic sensing of sensor mode (floor or room)
- Manual ON/OFF by 2-pole main power switch
- Blue backlight display
- Built-in timer function–4 selectable pre-programs –1 user-specific program daily editable in time blocks of 30 minutes
- Adaptive function in order to reach the desired temperature at the desired time
- Booster function for fast heat-up (+5°C for max 2 hours)
- Read-out of actual floor sensor temperature
- Monitoring of floor or room sensors. In the event of failure of an active sensor, the underfloor heating system is switched off
- Possibility to lock the settings eg public buildings
-
Raychem – T2 Red Cable
T2Red floor heating cable 5-15W/m 230V
T2Red is a self-regulating underfloor heating cable for reduced height installation. The cable can be installed under any type of floor surface without the risk of overheating. The intelligent heating cable is ideal for improved living comfort in the entire house, from the bathroom to the children’s room.
- Easy-to-design: one heating cable for all shapes of rooms.
- Flexible: cut-to-length, no cold lead needed.
- Ideal for renovation: reduced height (max. 8 mm).
Applications
Living rooms, kitchens, bathrooms, dining rooms, child’s room, conservatories :
- Top floor: Tiles, parquet, natural stone, laminate, carpet*
- Sub floor: Cement screed; anhydrite screed, wooden floor, Gypsum board, timber floor board, asphalt screed.
- *must be suitable for underfloor heating (maximum resistance to heat transfer 0,15 W/m²K)
-
Raychem – T2Reflecta
- T2Reflecta-Pack 1m² mat
- 3pcs of T2Reflecta-plates (720mm x 400mm)
- 2pcs of end plates (100mm x 400mm) for 0.944m²
- T2Reflecta-Pack 3m² mat
- 10pcs of T2Reflecta-plates (720mm x 400mm)
- 6pcs of ends plate (100mm x 400mm) for 3.12m²
- T2Reflecta-end plate-pack
- 6pcs of extra end plates (100mm x 400mm)
- T2Reflecta-Pack 1m² mat