Industrial Heaters
Showing 145–156 of 165 results
-
PTFE Insulated Heating Tape – ITW/SS (260°C)
Quick ViewIsopod IT-ITW/SS pre-terminated resistance heating tape is specially designed for application in temperatures up to 200°C. The temperature depends on the power and usage. Please make sure that the heating tape does not exceed the maximum withstand temperature.
These highly flexible tapes can be easily coiled around pipelines and valves, supports, pumps, flanges, filters, gauges, or other devices of irregular shape. The resistance element forms a closed heating circuit with connection joints only at one tape end.
-
PTFE Insulated Heating Tape – ITW/SS-M (110 TO 170°C)
Quick ViewIsopod IT-ITW/SS-M is a factory-terminated heating tape having a go-and-return series-resistance heating element insulated with a PTFE sheath covered with a stainless-steel braid complete with an M20 gland.
-
Quartz Glass Insulated Heating Tape – H (900°C)
Quick ViewIsopod IT-H heating tape is suitable where high power input is needed or where work has to be carried out at high temperatures.
The high-quality quartz glass allows a working element temperature of up to 900°C. This tape should only be used in dry atmospheres with additional electrical protection and always with a temperature regulator.
-
RACO Heating Cable
Quick ViewThe TFE/N/MB flexible heating cable is an ideal design for the economical application in cold room doorframe, defrost-dish, drain-line and etc. Having a diameter of 2.8mmØ (+/- 2mm), It’s can be applied to a small diameter pipeline. With an operating temperature of –40º to +250ºC, it’s ideal for versatile usage. Variable lengths are available, and all lengths are completed with 1000mm factory terminated cold lead.
-
Raychem – CE-T2Red/ETL- Termination
Quick ViewHot applied low profile End seal kit, for T2 Red heating cables, for hazardous areas, heat-shrink, low profile design for installation under insulation.
-
Raychem – R-TC-NRG Timer Thermostat (Polar White)
Quick ViewAutomatic sensing of sensor mode (floor or room)
- Manual ON/OFF by 2-pole main power switch
- Blue backlight display
- Built-in timer function–4 selectable pre-programs –1 user-specific program daily editable in time blocks of 30 minutes
- Adaptive function in order to reach the desired temperature at the desired time
- Booster function for fast heat-up (+5°C for max 2 hours)
- Read-out of actual floor sensor temperature
- Monitoring of floor or room sensors. In the event of failure of an active sensor, the underfloor heating system is switched off
- Possibility to lock the settings eg public buildings
-
Raychem – T2 Red Cable
Quick ViewT2Red floor heating cable 5-15W/m 230V
T2Red is a self-regulating underfloor heating cable for reduced height installation. The cable can be installed under any type of floor surface without the risk of overheating. The intelligent heating cable is ideal for improved living comfort in the entire house, from the bathroom to the children’s room.
- Easy-to-design: one heating cable for all shapes of rooms.
- Flexible: cut-to-length, no cold lead needed.
- Ideal for renovation: reduced height (max. 8 mm).
Applications
Living rooms, kitchens, bathrooms, dining rooms, child’s room, conservatories :
- Top floor: Tiles, parquet, natural stone, laminate, carpet*
- Sub floor: Cement screed; anhydrite screed, wooden floor, Gypsum board, timber floor board, asphalt screed.
- *must be suitable for underfloor heating (maximum resistance to heat transfer 0,15 W/m²K)
-
Raychem – T2Reflecta
Quick View- T2Reflecta-Pack 1m² mat
- 3pcs of T2Reflecta-plates (720mm x 400mm)
- 2pcs of end plates (100mm x 400mm) for 0.944m²
- T2Reflecta-Pack 3m² mat
- 10pcs of T2Reflecta-plates (720mm x 400mm)
- 6pcs of ends plate (100mm x 400mm) for 3.12m²
- T2Reflecta-end plate-pack
- 6pcs of extra end plates (100mm x 400mm)
- T2Reflecta-Pack 1m² mat
-
-
Silicon Sheathed Cable – FG220 (95 TO 165°C)
Quick ViewFG220 is a parallel circuit, medium-powered constant output tracer that can be cut to any length. FG220 incorporates a high-temperature silicone rubber outer insulation that provides an extremely flexible and versatile heating cable that is suitable for a variety of applications. It is designed for high-temperature process maintenance applications in non-chemically aggressive environments. It has twin conductors with extruded high-quality, high-temperature silicone rubber primary insulation. The heating element is zone connected to the conductors and overheated with a further layer of high-temperature silicone rubber secondary insulation. A stainless steel over braid is available as an option.
-
Silicone heating cable KDL (200ºC)
Quick ViewIsopod IT-KDL heating cables are specifically designed for internal and external heating of refrigeration drain-lines and freezer doors. KDLs are constructed from silicone rubber, making them water-resistant, and are supplied factory terminated in standard lengths. IT-KDL-SRs are specially produced in a small round form, making them very flexible and ideal for small bore drain-lines. Flexible SL and SR versions are constructed with steel braiding.
-
Silicone Heating Tape – GW (200°C)
Quick ViewIsopod IT-GW 27 is a factory-terminated heating tape constructed from a PTFE electrical insulated resistant wire extruded in silicone rubber. The construction means it is suitable for use in wet environments. The outer jacket is smooth and maybe washed down for cleaning, which also makes it suitable for use in dirty areas. The IT-GW27 must be with appropriate temperature control. We also offer suitable controllers and sensors for your application.